HOW TO MAKE SIMPLE CONVENIENT CUPS FOR SPROUTS

When the sprouts will grow up centimeters to ten, it replace in specially made temporarily "pots".

The method is extremely simple. At small skill they can be "wound" to hundred in an hour. It becomes so. The old big newspaper sheet is cut on four equal parts. The size turns out approximately 30 X 20 cm. Papers bend half-and-half and wind on any cylindrical subject, for example, on a bottle in capacity of 250 ml, it is desirable with a concave bottom. The paper cylinder from four layers of the newspaper as a result turns out. Edges of paper preparation should leave on 3-4 cm for an edge of a bottom of a bottle. These edges bent on a bottom. The cup remove from a bottle and it is ready for planting of plants. Any fastenings or pasting it is not required.

The sprouts grown up in such cups are easy for transporting. The plant at change is not injured, as by the planting moment the friable paper cups easily leaves. It is possible to put sprouts in ridges and with the cap rests - in the earth it will definitively rot, and plant roots freely will pass through the paper rests.